Colorado, New York and Massachusetts petitions
How Many Signatures Do You Need to Run for Office in New York?
It depends on the kind of petition. For a party's designating petition, you need signatures from 5 percent of the party's enrolled voters in the district, or a cap set by state law, whichever is less. Outside New York City, the cap is 500 for a city council district or a city of 25,000 people or fewer, 1,000 for a city of more than 25,000 and up to 250,000, and 2,000 for a city of more than 250,000. For an independent nominating petition, you need 5 percent of the votes cast for governor in the district at the last election for governor, up to 1,500 for an office outside New York City. A village independent petition needs 50, 75 or 100 signatures depending on the village's population, or 5 percent of the last village election's voters in a village under 1,000. A school board petition needs at least 25 signatures or 2 percent of the last board election's voters, whichever is greater, or 100 in a small city district.
These rules come from the New York Election Law (sections 6-136, 6-142 and 15-108) and the Education Law (sections 2018 and 2608). Your county board of elections, village clerk or school district clerk calculates the exact number for your office, so ask them before you set your target. For the full petition process, see our guide to New York designating petitions.
Designating petitions: 5 percent or the cap
A designating petition puts you on one party's June primary ballot. The requirement is the smaller of two numbers:
- 5 percent of the party's enrolled voters who live in the district, counted from the most recent enrollment and not counting voters in inactive status; or
- the cap for the office.
For offices outside New York City, the caps are:
| The office is filled by the voters of | Cap |
|---|---|
| A city or county of more than 250,000 people | 2,000 |
| A city or county of more than 25,000 and up to 250,000 | 1,000 |
| Any other city or county | 500 |
| A council district in any city outside New York City | 500 |
| A county legislative district | 500 |
| A district contained inside a larger one | no more than the larger one requires |
The population figures come from the last federal census.
Examples from a county board. Erie County's 2026 political calendar lists the caps it applies: 2,000 for county-wide offices and for city-wide offices in Buffalo, 500 for all offices in the cities of Lackawanna and Tonawanda, and 500 for all elective town offices. If 5 percent of a party's enrolled voters in the district is smaller than the cap, the smaller number is the requirement.
An illustration only. Suppose a ward has 3,000 voters enrolled in one party. Five percent is 150, which is under the 500 cap for a council district, so a candidate of that party needs 150 signatures. Another party with 800 enrolled voters in the same ward would need 40. The rule is the same for every party; only the number of enrolled voters differs.
Because the number depends on enrollment, it is different for each party and each district. Ask your county board of elections for the figure for your party and office.
Independent nominating petitions: 5 percent of the governor vote
An independent nominating petition puts you on the November ballot under the name of an independent body that you choose. The requirement is 5 percent of the total votes cast for governor at the last election for governor in the district, not counting blank and void ballots, with these caps:
- 1,500 for any office filled in a county or part of a county outside New York City, which covers city, ward and town offices;
- 3,500 for any office in a political subdivision wholly outside New York City;
- 1,500 for an Assembly district, 3,000 for a State Senate district and 3,500 for a congressional district.
Who may sign matters as much as the number. Signers must be registered voters of the district, and a signature does not count if the same voter's name appears on another valid petition for the same office. In practice, if a voter signed a valid designating petition for the seat in February, their signature on your independent petition in April will not count.
Village independent nominating petitions: a fixed number
For a village election, the number is set by the village's population at the last federal census:
| Village population | Minimum signatures |
|---|---|
| 5,000 or more | 100 |
| 3,000 to 4,999 | 75 |
| 1,000 to 2,999 | 50 |
| Under 1,000 | 5 percent of the voters at the last regular village election |
Signers are residents of the village registered with the county board of elections when they sign, or who were on the list of registered voters for the last village election. A voter may sign only one petition for mayor or village justice and one for each open trustee seat; for those offices, only the earliest signature counts.
A party that holds a village primary, where its county rules provide one, uses a village designating petition instead, which needs 5 percent of the party's enrolled voters living in the village. Under state law, a party nominates its village candidates at a caucus unless its county committee's rules provide for a village primary, and a caucus needs no petition.
School board petitions: 25, 2 percent or 100
School board petitions follow the Education Law, not the Election Law.
- Union free, central and common school districts: at least 25 qualified voters of the district, or 2 percent of the people recorded on the poll list as voting in the previous annual election of board members, whichever is greater. As an illustration, a district where 3,000 people voted last May needs 60 signatures; a district where 900 voted needs 25.
- Small city school districts (Article 53 of the Education Law): at least 100 people qualified to vote at school elections in the district.
In a district where each seat is a separate office, you need a separate petition for the seat you seek.
There is no maximum, so plan a margin
New York does not cap the number of signatures you may file. The caps above limit only what you are required to collect. That makes the margin your own decision.
Signatures are lost for predictable reasons:
- the signer is not registered, or is registered outside the district;
- on a designating petition, the signer is not enrolled in the party, or changed enrollment after February 14;
- the signer also signed for another candidate for the same office;
- the line is missing the date or a residence address;
- the whole sheet is lost because its witness statement is incomplete, the witness was not eligible, or the election date at the top is wrong.
As an example only, a candidate with new carriers might plan to collect half again as many signatures as the requirement, or more. Our general guide on how many signatures to collect above the minimum uses Illinois examples, but its reasoning applies in New York, where there is no maximum to stay under.
Turning your target into doors
Once you have a target, work out how many doors it takes. Track two numbers over your first few sessions: the share of doors where someone answers, and the share of those people who sign. As an illustration only, if someone answers at one door in three and half of them sign, each signature takes about six doors, so a target of 225 points to roughly 1,350 doors. A designating petition narrows the doors to enrolled members of the party, so a list of enrolled voters from your county board saves your carriers many wasted knocks.
Beacon helps you plan and record that work. Draw each carrier's turf on the map and assign it, add your contacts, and each carrier gets a walk list of the doors in their turf on their phone. Beacon records which doors were visited and the result at each one, and the carrier can note "signed" or "not signed" in the door result's Notes field. Turf completion percentages and the leaderboard show which areas still need visits. The paper sheet remains the legal record of every signature. Every plan includes unlimited canvassers.
The 2027 signing windows
All of these dates are based on state law; confirm them with the office where you file.
| Petition | First day to sign | Filing |
|---|---|---|
| Village independent (March 16 election) | Tuesday, December 29, 2026 | Tuesday, February 2 to Tuesday, February 9, 2027, village clerk |
| Designating (June 22 primary) | Tuesday, February 23, 2027 | Monday, March 29 to Thursday, April 1, 2027, county board |
| School board (May 18 election) | Set by the district | By 5 p.m. Monday, April 19, 2027 (most districts) or Wednesday, April 28, 2027 (small city districts) |
| Independent nominating (November 2 election) | Tuesday, April 13, 2027 | Tuesday, May 18 to Tuesday, May 25, 2027, county board |
The Legislature changed the designating petition dates for 2023 and again for 2026, so watch for a change before February. Our guide to filling out and carrying a New York designating petition covers the sheet itself.
Frequently asked questions
How many signatures do I need to run for city council in New York?
On a designating petition, 5 percent of your party's enrolled voters in the district, up to 500 for a council district outside New York City. On an independent nominating petition, 5 percent of the district's vote for governor at the last election for governor, up to 1,500.
How many signatures do I need to run for village trustee?
At least 100 in a village of 5,000 or more people, 75 in a village of 3,000 to 4,999, 50 in a village of 1,000 to 2,999, and 5 percent of the last village election's voters in a smaller village.
Is there a maximum number of signatures in New York?
No. The caps in the law limit how many signatures you are required to collect, not how many you may file.

