Colorado, New York and Massachusetts petitions

Filling Out and Carrying a New York Designating Petition

Rows of suburban houses among green trees under a cloudy blue sky

A New York designating petition sheet has four parts: the heading, which names the party, the primary date, the candidate, the office and a committee to fill vacancies; the signer lines, each with the date, the signer's name, residence address and town or city; the statement of witness at the bottom, signed by the person who carried the sheet; and, for a petition of ten or more sheets in many counties, a separate cover sheet. Every signature goes on paper, in ink, in front of the witness. For 2027, signatures count from Tuesday, February 23, and the sheets are filed with the county board of elections from Monday, March 29 to Thursday, April 1 (based on state law; the Legislature changed these dates for 2023 and 2026, so confirm them with your county board).

The same steps apply, with a few differences noted below, to an independent nominating petition (signed from Tuesday, April 13 and filed May 18 to 25) and to a village independent nominating petition (signed from Tuesday, December 29, 2026 and filed with the village clerk February 2 to 9). The rules come from Article 6 and section 15-108 of the New York Election Law and from the published instructions of the Tioga County Board of Elections, used as a named example. For the bigger picture, see our guide to New York designating petitions.

Step 1: Get the right form

The State Board of Elections prepares sample forms, and county boards make them available. A petition that copies the State Board's sample is treated as meeting the form requirements, so start from it.

Use the right kind:

Step 2: Fill in the heading before anyone signs

A blank clipboard and a pencil on a wooden table

On a designating petition, the heading includes:

  1. The party. The signers state that they are enrolled voters of this party.
  2. The date of the primary. For 2027, Tuesday, June 22 (based on state law). Tioga County's board warns that a wrong election date "will invalidate the entire petition." On an independent petition, use the general election date, Tuesday, November 2, 2027. On a village petition, use the village election date.
  3. Each candidate's name, the public office and the place of residence. Include the district or ward number, and if two offices with the same title are being filled for different terms, include the term in the title. Give your residence address, not only a mailing address.
  4. The committee to fill vacancies. The names and addresses of at least three people, enrolled in the party on a designating petition, or registered voters of the district on an independent petition. Leaving it off does not invalidate the petition unless a vacancy occurs that only the committee could fill, but fill it in.

On an independent petition, the heading also names your independent body and its emblem. The name must be in English characters and may not include or abbreviate an existing party's name, or be confusable with the name or emblem of an existing party or of an independent body named in an earlier filed petition.

Fill in the heading the same way on every sheet before you carry it.

Step 3: The signer lines

Each line has four entries: the date the person signs, the signer's name, their residence address, and their town or city. Fill in the signer's town or city; Tioga County's board asks for the name of the town, not a village or post office name.

Before each person signs, confirm two things: they are registered at an address inside the district, and, on a designating petition, they are enrolled in your party. A voter who changed enrollment after February 14 is not enrolled in the new party until after the June primary.

A voter should not sign for more candidates than there are seats; signatures made on the same date then count for no one.

Step 4: Carry the sheet yourself

A hand signs a printed paper form with a pen on a wooden desk

In New York, the carrier is the witness. The person who signs the witness statement at the bottom of a sheet must have seen every signature on it.

Who can carry and witness:

Rules every carrier should follow:

Our general post on recruiting and training petition circulators uses Illinois examples, but its approach to briefing volunteers applies here too.

Step 5: Complete the statement of witness

When a sheet is finished, the carrier completes the statement at the bottom:

  1. Name of the witness.
  2. For a designating petition, the party in which the witness is enrolled.
  3. The witness's residence address.
  4. The number of signatures on the sheet. If the number is understated, the sheet still counts, but only up to the number stated; the extra signatures at the end are treated as not filed. Count carefully.
  5. The date and the witness's signature.
  6. Witness identification information: the witness's town or city and county, printed under the signature. The form itself says this "must be completed prior to filing with the board of elections in order for this petition sheet to be valid."

Someone other than the witness may fill in the information above the witness's signature, as long as it is done before the witness signs or in the witness's presence. The statement is treated as the equivalent of an affidavit, so a false statement carries the same penalties as if the witness had been sworn.

On a village independent petition, the witness statement is shorter: a qualified New York voter states their address, the number of signatures, and that each voter signed in their presence.

Step 6: Plan the drive door to door

A woman writes on a clipboard while standing against a gray wall

For a designating petition, a list of the party's enrolled voters in the district, from your county board of elections, keeps carriers at doors where people can sign.

Beacon helps with this part. Draw each carrier's turf on the map, inside the ward, village or district, and assign it. Add your contacts, and each carrier gets a walk list of the doors in their turf on their phone. Beacon records which doors were visited and the result at each one: contacted, not home, refused, come back later and the other door codes. At each door, the carrier can note "signed" or "not signed" in the door result's Notes field. Send carriers back to the not-home doors before opening new turf. If signal drops while the app is open, Beacon keeps recording door results. The signed sheet is the only legal record of each signature; Beacon keeps the record of the doors. Every plan includes unlimited canvassers, so adding carriers does not change your price.

Step 7: Number, bind and add the cover sheet

Election Law requires the sheets of each volume to be numbered and delivered in the manner the State Board of Elections prescribes. County boards publish the details. Tioga County's instructions, as an example:

Ask your county board for its cover sheet form and binding rules before filing week. If the board finds that your petition breaks one of its filing regulations, you have three business days from that determination to fix it.

Step 8: Review every sheet, then file

A person in a checked shirt signs a printed document at a wooden table

Before filing, check each sheet for the party and correct election date at the top, the office and district number, a complete signer line for every signature, no duplicate or out-of-district signers, a complete witness statement with the right count, and the numbering, binding and cover sheet your board requires.

Our general checklist on how to check your petition before filing was written for Illinois, but most of its checks apply to New York sheets. To confirm your number, see how many signatures you need to run for office in New York.

Then file with the county board of elections (or the village clerk, for a village election the village runs) between 9 a.m. and 5 p.m. in the filing window. Westchester County accepts designating and nominating petitions until midnight on the last day. Ask for the date and time of filing to be recorded, and keep a copy of every sheet.

After you file

A signature on your petition is not permission to text the signer. If you want to text supporters, keep a separate sign-up sheet, never the petition sheet itself, that says plainly the person agrees to receive campaign texts and records the date. Only people who agreed that way should get texts. CampaignCNX+, a separate texting product, handles those texts, and its guide to running for local office in New York covers the campaign that follows filing.

Beacon

Field operations software for teams that knock.

Territories drawn on a map, walk lists ordered by street, door results recorded even without signal, and coverage you can read while the shift is still running. Start with Beacon for petition drives.

Free trial
14 days, with the Starter plan's features
Canvassers
Unlimited on every plan
Offline
Works with no signal